Rebuilding A Foam Cored Rudder Part 2

The foam that I used in this video was a #16 closed cell urethane foam supplied by US-Composites. Here’s a link to their foam page for spec’s and pricing. In total I believe I used roughly 4 gallons (2 gal of part A, and 2 gal of part B) for this rudder which was for a Freedom 35. When doing this type of repair, it really helps to have the rudder mounted on a couple of saw horses. This allows good access to all sides…

Rebuilding A Foam Cored Rudder Part 1

There will be more follow up videos showing the entire process start to finish. If you have any Q’s please post them below! Thanks for watching 🙂

Classic Boat Finish On Mahogany

Video Thumb

Here we take a look at the stains and finishing process used to get the same outstanding appearance that is typically associated with traditional mahogany runabouts! Deep uniform stains and a varnished surface so perfect it can double as a mirror 🙂 All of the materials used were manufactured by Pettit Paint (which is also the same stuff that builders such as Hackercraft use!) The stain itself is thinned down roughly 25% with Pettit’s general 120 thinner and can be applied a number of different…

Copyright 2017 Boatworks Today · RSS Feed · Log in

The Verbage Theme v2 by Organic Themes · WordPress Hosting

Organic Themes