How To Fiberglass Over Plywood

In this video I am using laminating poly resin, 1.5 oz csm and 1708 bi-axial glass. In order to ensure a good bond onto the plywood it is essential to pre-coat the surface with resin! Not doing so will almost certainly result in a dry layup and de-lamination 🙁 Not good… In total, I used 12oz of resin to pre-coat the surface and layup all the glass shown in the demo. The fin roller I used to establish the radius on the fillet is 1/2″…

Copyright 2017 Boatworks Today · RSS Feed · Log in

The Verbage Theme v2 by Organic Themes · WordPress Hosting

Organic Themes