Fairing A Repair For Gelcoat

This is part 4 of the fiberglass and gelcoat series, “There’s A Hole In My Boat!” The remaining video’s will be coming out over the next week 🙂

Sources for the AdTech P-14 filler used in this video:
Express Composites (This is who I generally use as they are close to me)
Cass Polymer (Direct from the manufacturer!)

Please feel free to post any questions or comments below (providing you’re not a SPAMMER!)

Thank you!

Comments
4 Responses to “Fairing A Repair For Gelcoat”
  1. Kurt says:

    Andy,

    Nice job on the vids!

    They are a great help with the Gamefisher Project.

    From our previous conversation, all is going better with the repare….

    Kurt

  2. Alex says:

    Andy,

    I’ve already done the repairs my boat and I used Bondo body filler to get the surfaces where I want them. Unfortunately I just found your videos and was wandering what my options are now? I’m not looking for perfection but just to last a few years. I’m ready to apply gelcoat. Would applying a layer of resin over the top of all of it and sanding that work?

    Thanks,
    Alex

    • ~Andy ~Andy says:

      Applying a seal coat wouldn’t hurt, but I think you’ll be ok with just applying gel. Sand the bondo really well, clean and apply 🙂

  3. Jason Robinson says:

    I used your videos almost exclusively in order to to fix a 2′ x 1′ hole in my Coronado 15′ sailboat.

    Thank you very much for putting these up. You helped save a wonderful little `72 sailboat from the junk yard.

    Project pics
    http://imgur.com/a/awBnX

    Near the end I made a video to explain why and what I did.
    https://plus.google.com/+JasonRobinsonidaho/posts/STkcrrEQWzB

Leave A Comment

Copyright 2017 Boatworks Today · RSS Feed · Log in

The Verbage Theme v2 by Organic Themes · WordPress Hosting

Organic Themes